Task: Removing the carrier bearing hangers from the donor shell Tools Needed: Drill Breaker bar Sockets Pry bar Large drill bit or spotweld cutter (and optional refill cutters) Small drill bit or punch The carrier bearings are the hangers that mount the driveshaft to the bottom
Read More...
If you’ve been following us on instagram (VertTuner), you know I’ve spent the summer working on two projects. The first was replacing the headgasket on a 99 Subaru Outback Legacy. The aim of the first project is to make it a daily driver while
Read More...
When of the best ways to improve safety in any car is to increase visibility in inclement weather by adding fog lights. As it happens, I’m putting together a great post on the installation of a knock off VRSF front mount intercooler, or FMIC, in
Read More...
One of most fun parts of driving a convertible is driving through the twisties on a sunny day. Taking a tight corner is one the most exhilarating parts of driving any car. One of the biggest components of maintaining control in a hard corner is
Read More...
Making your own fuel lines may sound difficult, or even scary, but it’s actually pretty easy and fairly safe. Whether you need a new fuel line as a part of a restoration project, or are trying to prep for a larger turbo charger, braided lines
Read More...
I’ve had a Fuelab AFPR (Adjustable Fuel Pressure Regulator) sitting in my toolbox since mid-summer before we started the timing job. Worse than that, I’ve had my Walbro 255 since I was still working on the old 420a shell. In order to use the
Read More...